Technology

Mongemo – online partial discharge monitoring system for rotating machines3 min read

14. November 2016, Reading Time: 3 min

Mongemo – online partial discharge monitoring system for rotating machines3 min read

Lesedauer: 3 Minuten

The new MONGEMO online partial discharge (PD) monitoring system from OMICRON continuously assesses the dielectric condition of stator insulation in rotating machines under load, such as turbo generators, hydro generators and electrical motors.

OMICRON is an international company serving the electrical power industry with innovative testing and diagnostic solutions.  The permanently-installed system collects and analyzes PD data over time and identifies insulation defects that could lead to dielectric failure and machine outages.

The MONGEMO PD monitoring system is customizable to match the exact requirements of various rotating machines. It consists of coupling capacitors for PD detection, a 4-channel PD acquisition unit, and a central computer with monitoring and PD analysis software. With the convenient web interface, users can remotely configure the monitoring system, view realtime data and historical trends, and analyze the collected raw data.

ADVANCED TECHNOLOGY FOR CONVENIENT DATA EVALUATION
The high PD measurement sensitivity of the MONGEMO monitoring system is based on advanced OMICRON technology for noise suppression and PD source separation. Multiple PD sources are distinguished from external noise through synchronous multi-channel measurements and advanced methods like 3PARD (3-Phase Amplitude Relation Diagram) and automatic cluster separation for convenient visual evaluation.

ACTIONABLE DATA FOR ASSESSING RISK OF FAILURE
MONGEMO monitoring software automatically displays real-time data as well as historical trend diagrams of statistical parameters for each monitored machine, such as PD magnitude and PD pulse frequency. Users are also provided with an event log that displays warnings and alarms when PD activity reaches or exceeds predefined threshold values. The related raw PD data can be evaluated further using the system’s expert software for in-depth PD analysis. The actionable data allows users to assess the risk of dielectric failure in their machines and to optimize their maintenance and asset planning.

SEAMLESS INTEGRATION WITH THIRD-PARTY SYSTEMS
MONGEMO supports multiple industrial communications standards. This enables PD monitoring data from MONGEMO to be easily exported to SCADA systems. The system also displays monitoring data from other third-party devices, such as temperature sensors.

EXPERT ADVICE AND SUPPORT
OMICRON provides users with complete guidance and support during the design, setup and use of the MONGEMO monitoring system. This includes on-site consultations to evaluate monitoring needs; customized system design, installation, commissioning and training; as well as support with data evaluation and reporting.

PD MONITORING DETECTS INSULATION DEFECTS
Statistics for rotating electrical machines show that a major source of their failure is linked to defects in stator insulation. A majority of these defects can be detected early through the continuous, permanent monitoring of PD activity. PD occurs in the stator insulation system of generators and motors, where local electric field stress exceeds the local electrical strength.

RISING PD ACTIVITY INDICATES INSULATION DEGRADATION
The insulation materials typically used for rotating machines are resistant to a certain level of PD. However, an increase in PD activity over time often indicates insulation defects and degradation caused by operational stress factors and aging processes. If left unattended, this could lead to failure and serious consequent damage.

MONITORING DATA OPTIMIZES MAINTENANCE STRATEGY AND ASSET PLANNING
Online PD monitoring is a well-established technique used to continuously assess the condition of a stator winding insulation system. The actionable data helps organizations to optimize their asset management, maintenance efforts and investment planning. Machine failures can be avoided through the timely implementation of maintenance and repair measures to ensure a longer service life.

COMPANY PROFILE
The application of OMICRON products allows users to assess the condition of the primary and secondary equipment on their systems with complete confidence. Services offered in the area of consulting, commissioning, testing, diagnosis and training make the product range complete. Customers in more than 140 countries rely on the company’s ability to supply leading edge technology of excellent quality. Service centers on all continents provide a broad base of knowledge and extraordinary customer support. All of this together with our strong network of sales partners is what has made our company a market leader in the electrical power industry.

Share: